Signals

When building our railway, we were shocked by the lack of available signals available on the market outside of the LGB range. We have a number of these but wanted a more modern continental look on our layout. We're delighted to offer our selection of colour light signals to other continental modellers.

The basis for our range is on the fairly generic RhB style 2 and 3 aspect LED models which are most flexible and give the instant impression of a signal to the non-enthusiast visitor, given their classic design. They are hand made in small batches primarily from Brass and finished in waterproof paint. The 3mm LEDs are maintenance-free and are suitable for 9-24V operation. They are simple to wire in to your layout and have a fixing point in the base.

We also offer RhB and DB crossing lights. Signals specifically styled around the DB and HSB signal architecture are also available but may take longer to fulfil.

The range can be used on analogue layouts with simple switches or combined with DCC decoders for operation as part of a system. All signals come with wiring guidance and, of course, further support by telephone / email if required.

Please note that these are not mass produced so some minor variances model to model should be expected reflecting their hand-crafted nature.

For more information, check out our explainer videos.

Generic LED Signals (Swiss RhB Design)

RHB Two Aspect £ 38

Mast with base fixing.


Perfect for your Swiss-styled layout or to add basic signalling to any layout. Grey mast.

RHB Three Aspect £ 42

Mast with base fixing.


The addition of a distance warning yellow indicator LED. Best wired with a three way switch or dedicated multi-aspect decoder

RHB Two or Three Aspect £ 38

Rear fixing for bridge or gantry


Great for mounting on scale catenary poles, bridges, lineside constructions or inside the shed. Alternatively, build your own mast.

RHB Crossing Lights x2 £ 50



Option1: Flashing Lights (note: LEDs may not flash in sync)

Option 2: Static LEDs (made to order)

RHB Distant £ 44

Mast with base fixing.


Perfect for your Swiss-styled layout. Can be switched independently or wired in parallel with a home signal

*** Made to order

RHB Combination £ 58

Mast with base fixing.


A home and distant combination signal for more authentic and varied Swiss styled railways. 2+2 Aspect

*** Made to order

RHB Combination £ 60

Mast with base fixing.


A home and distant combination signal for more authentic and varied Swiss styled railways. 3 +2 Aspect

*** Made to order

DB German Signals

DB 2/3/4 Aspect £ 50

Green mast with base fixing.


Prototypical German Deutsche Bahn signal design with two red, one green and one amber LED.

Green post with markings.

DB Three Aspect £ 40

Rear fixing for bridge or gantry


Great for mounting on scale catenary poles, bridges, lineside constructions or inside the shed. Alternatively, build your own post.

DB Crossing Lights x2 £ 50



Option1: Flashing Lights (note: LEDs may not flash in sync)

Option 2: Static LEDs (made to order)

HSB German Signals (Harz Mountain Railway), OBB (Austrian) & DR-era

HSB Three Aspect £ 48

Mast with base fixing.

*** Made to order

HSB Four Aspect £ 48

Mast with base fixing.

*** Made to order

OBB Four Aspect £ 54

Mast with base fixing.

*** Made to order

DR Crossing Lights x2 £ 50


*** Made to order

Other Signals

Other signals such as mutli-aspect distance or distance combinations are available by special order - please enquire

DCC Control

Our DCC Signal Decoder £35

Currently on the production line!

  • DCC Signal decoder

  • Waterproof ABS housing

  • 2, 3 or 4 aspect control options - please specify when ordering

    • 2 aspect decoders can control 2x 2 aspect signals - double the control for your money!

    • 3 / 4 aspect decoders can control one signal each

  • Ideally suited to our signals

  • Pre-wired and heat-shrunk to our signals for nominal fee of £4

  • Programming at the push of a button - no CVs to worry about!

  • Competitively priced

Prototype DCC Signal Controller

Our DCC Crossing Light Decoder £35

Currently on the production line!

  • DCC Crossing light decoder

  • Waterproof ABS housing

  • Ideally suited to our crossing signals

  • Pre-wired and heat-shrunk to our signals for nominal fee of £6

  • Damp-resistant speaker sound playback option at extra cost of £10

    • (house it in an adjacent building for beeping crossing sound)

  • Programming at the push of a button - no CVs to worry about!

  • Competitively priced

Photo to follow

Massoth 8156101 switch controller £71

  • Best suited to 2 aspect signal controller

  • Control up to FOUR 2 aspect signals independently

  • Also controls LGB EPL style points and signals

  • Can be wired with real switches for physical controls as well as digital via the Navigator handset

  • Programming instructions for our signals included as standard